SC Series Scrubbers

SC Series – Wet gas scrubbing with water absorption

SC scrubbers, manufactured by SA NU VENT, are used in industrial plants for removing pollutants from exhaust gases (CO, NO, SO₂, dust), reducing atmospheric load and protecting downstream equipment. The process is based on water absorption and intense gas-liquid contact through nozzles, packing, and droplet separation.

Operating principle

The water in the tank is automatically maintained at the level by the regulator and level pipe. The recirculation pump feeds the nozzles that spray into the tanks. The gases enter through the inlet connection, are scrubbed along the route (sections A–F), and pass through the packing made of plastic bodies, where mass transfer and pollutant absorption take place.
On the droplet separator (filter mesh), the vapors condense and return to the circuit. The water pressure is read on the pressure gauge and adjusted from the valves. The loaded water is discharged through the drain valve, and the evaporation losses are automatically replenished.

The main components are:
  • 1. Water tank
  • 2, 3, 4, 5. Tanks
  • 6. Water supply pipe
  • 7. Level regulator
  • 8. Level pipe
  • 9. Drain valve
  • 10. Recirculation pump
  • 11. Suction pipe
  • 12. Discharge pipe
  • 13. Pressure gauge
  • 14. Valves
  • 15. Circular pipes
  • 16. Spray nozzles
  • 17. Gratings
  • 18. Packing made of plastic bodies
  • 19. Droplet separator (filter mesh)
  • 20. Inspection doors
  • 21. Gas inlet connection
  • 22. Clean air outlet connection

The operating test is performed without load and under load in accordance with the operating instructions of the hydraulic system.

Technical specifications – Model SC
ModelAir flow (m³/h)Section A Φ1×Φ2×h (mm)Section B Φ×h (mm)Section C Φ×h (mm)Section D Φ×h (mm)Section E Φ×h (mm)Section F Φ×h (mm)
SC 22 000550×250×950550×700550×700550×700550×700800×1000
SC 44 000800×380×950800×700800×700800×700800×7001200×1000
SC 66 000950×450×950950×700950×700950×700950×7001400×1000
SC 88 0001100×500×9501100×7001100×7001100×7001100×7001600×1000
SC 1010 0001200×550×9501200×7001200×7001200×7001200×7001800×1250
SC 1212 0001300×600×9501300×10001300×10001300×10001300×10001900×1250
SC 1515 0001500×700×9501500×10001500×10001500×10001500×10002200×1250
SC 1818 0001600×750×9501600×10001600×10001600×10001600×10002400×1250
SC 2020 0001700×850×9501700×10001700×10001700×10001700×10002500×1500
SC 2222 0001800×850×9501800×10001800×10001800×10001800×10002700×1500
SC 2525 0001900×900×9501900×12501900×12501900×12501900×12502800×1500
SC 2828 0002000×950×9502000×12502000×12502000×12502000×12503000×1500
SC 3030 0002100×950×9502100×12502100×12502100×12502100×12503150×1500


SCRUBBER Technical Sheet – SC Series

Pdf (346 kb)